Aged Leads: How to Work an Old List Without Burning Your Numbers
Check four dates before you redial an old lead list, sort it into buckets, then test a small batch at low lines so your phone numbers stay clean.

This is general information, not legal advice. Laws change and differ by state. Talk to a lawyer about your own calls and texts.
The short answer: before you redial an old list, pull four dates for every record: when the person last asked about your service, when they last bought, when they last said stop, and when the number was last checked against the National Do Not Call Registry. Sort the list by those dates, take out everyone you should not call, then dial one small batch at a low line count and watch each phone number's answer rate.
Why old lists burn numbers
An aged lead is someone who asked about your service a while ago and never bought. Some are still worth a call. The rest cost more than rep time:
- Fewer people answer. Old records carry more wrong numbers and dead lines, so you dial more to reach the same number of people, and every extra dial lands on your caller ID.
- More people report the call. Someone who forgot they asked will often treat you as spam, and short calls and spam reports are how business numbers get labeled. Why Your Sales Calls Show "Spam Likely" explains how.
- Old permission can run out. Several rules below have clocks on them.
So most of the work happens before the first dial: deciding who should hear from you at all.
The four dates to pull for every record
- Inquiry date. The last time the person asked you about your service: a web form, a quote request, a call. Not the date the file was imported.
- Last purchase date. For past customers, the last time they bought, paid or signed with you.
- Last stop request. Any "stop," "take me off your list" or "don't call me," on any channel, from any rep or older list.
- Last registry check. The date the number was last checked against a fresh download of the National Do Not Call Registry.
If a record has no inquiry date and no note of how the lead came in, that is an answer too. You cannot show why you may call, so the record waits until you can.
What the rules say about those dates
The relationship clock. For a number on the National Do Not Call Registry, one way a seller may still place a telemarketing call is an established business relationship. The FTC's rule, 16 CFR 310.2(q), defines it as a purchase or transaction in the last 540 days, or an inquiry or application in the last 90 days. The FCC's rule, 47 CFR 64.1200(f)(5), uses eighteen months and three months. After that, an old inquiry no longer counts as a relationship for the registry.
Signed permission is a separate exception. The FTC rule, 16 CFR 310.4(b)(1)(iii)(B), also allows calls to a registered number when the seller has the person's signed written agreement to be called by that specific seller at that number. An electronic signature can count. A form that only asked for "a free quote" may not say that, so have counsel read your old form wording.
The registry check has to be fresh. The safe harbor in both rules expects you to call from a version of the registry obtained no more than 31 days before the call. See 16 CFR 310.4(b)(3)(iv) and 47 CFR 64.1200(c)(2)(i)(D).
Stop requests outlast the list. The FCC rule says a do not call request to your company must be honored for five years from when it was made, under section 64.1200(d)(6).
Autodialed and recorded calls need consent that still holds. For telemarketing calls or texts to a cell phone made with an autodialer or a prerecorded voice, the FCC rule asks for prior express written consent, under section 64.1200(a)(2). People can take that consent back by any reasonable means, such as replying "stop," under section 64.1200(a)(10).
Some states add their own rules on top of these. The National Do Not Call Registry for Sales Teams goes deeper on the registry.
Sort the list into buckets
- Bucket A: asked in the last 90 days. Call these first.
- Bucket B: bought from you in the last 540 days. Past customers. Call about something real, like service or a referral.
- Bucket C: older, with a signed agreement on file. Check that it names your company and the number. If you cannot find the form, the record moves to Bucket D.
- Bucket D: older, with no signed agreement. The registry decides. A registered number stays off your telemarketing calls. Have counsel check your calling plan for the rest.
- Out: anyone with a stop request, a wrong person note, a complaint, a finished project or a closed deal. A record does not come back because it moved to a new file.
Clean the file before the first dial
- Merge duplicates, so one person is one record with all their history attached.
- Check your own do not call list, built from every past list, rep and channel.
- Run the registry check against a download no more than 31 days old.
- Check for reassigned numbers. A number your lead gave up may now belong to a stranger. For numbers where you had consent, the FCC's Reassigned Numbers Database tells you whether a number was permanently disconnected after the date you got consent. Section 64.1200(m) gives a caller who checked it a safe harbor if the database answers wrong.
- Drop records with no working phone or no inquiry date.
- Tag each record with its bucket and the date you cleaned it.
Test a small batch at low lines
Do not load the whole file. Pick one bucket and a batch your floor can finish in a day or two. A sample plan, not a benchmark:
- Batch: 200 records from Bucket A.
- Lines: one or two per rep. The usual line count math says a low answer rate needs more lines, and How Many Lines Should Each Rep Dial? shows that math. On an old list, start lower anyway. More lines mean more dials from each number every hour, more people hearing a pause, and less time for the rep to log what they learn.
- Numbers: spread the batch across several numbers you own, with a daily cap on each.
- Hours: inside each lead's own local calling window. Telemarketing Calling Hours covers whose clock counts.
- Attempts: at most two tries for each record in the test, on different days and at different times.
Write your pause rules down before the first call. Examples:
- One number's answer rate falls by about half in two days while your other numbers hold. Rest that number.
- More than 1 in 10 conversations reach the wrong person. Stop and recheck where the list came from.
- Several people in one day say they never asked to hear from you. Stop and pull the original forms.
What to say when they answer
Sample script. Swap every bracket for a true detail.
"Hi [first name], this is [Sam] with [Company]. You asked us about [a roof estimate] back in [March]. I'm calling to see if that's still on your list, or if I should close your file."
Why it works: it gives the real reason and the real date, so the person can place you. "Close your file" makes no easy to say, and a clear no is useful too. Never say "returning your call" or "following up on our conversation" unless that is what happened.
Replies to have ready:
- "We already got it done." "Glad it's handled. I'll close your file so we don't bother you again."
- "Not right now." "Sure. Is there a month that makes more sense to check back, or should I close it?" Write down the month they say.
- "I never asked you." "I'm sorry for the mix up. Do you want me to take this number off our list?" If yes, do it today, then flag the record so someone checks its source.
- "Stop calling me." Use your opt out script. The opt out guide has one, plus the checklist that makes it stick.
Log outcomes that teach you about the list
- Still interested: book the appointment or a callback with a date.
- Not now: the month to check back, in their words.
- Done elsewhere: close the record for this project.
- Wrong person: mark that number wrong for that lead. Do not ask the person for anyone else's number.
- Never asked: stop, and send the record for a source review.
- Stop request: onto your own do not call list the same day.
- No answer: count the attempt and stop at your cap.
At the end of the test, decide for each bucket: keep working it, fix the source, or retire it. Retiring a bucket is a good result. It keeps a bad list from wearing out good numbers.
GameForce for working an old list
Number rotation: calls spread across your numbers, with a daily cap on each one. Number health: numbers with falling answer rates are rested and skipped.
Do Not Call checked before every call and text. By default, calls and automated texts keep to 8 AM to 9 PM in each lead's own time zone, and stricter state hours narrow that window.
Settings support the checks above. The dates, the buckets and the decision to call stay with your team.
FAQ
How old is too old for a lead?
There is no single age. For a number on the National Do Not Call Registry, the FTC rule's inquiry relationship lasts 90 days and its purchase relationship 540 days, and the FCC rule uses three and eighteen months. After that, a seller calling a registered number for telemarketing needs the person's signed written agreement.
Should I put an old list on more lines?
Start low. More lines mean more dials from each number every hour and more people hearing a pause. Raise lines only after a small test shows few wrong numbers and steady answer rates.
What if someone says they never asked to be contacted?
Apologize, offer to take the number off your list, and do it the same day if they say yes. Then pull the original inquiry for that record. If several people from one source say the same thing, stop the batch and review the source.
Test one old list the careful way
Book a demo and bring one old list's record counts by inquiry age, or start a free trial.



